Similar Posts
Degree of Saturation (SR)
Degree of Saturation (SR) “Degree of Saturation” (SR) is an engineering geology term and refers to the ratio of the volume of water to the total volume of void space. The Degree of Saturation or SR-value ranges from 0% to 100% (0% being completely dry, and 100% being fully saturated). Degree of Saturation Formula Degree…
Active Methane Mitigation System
Active Methane Mitigation Active Methane Mitigation: Active systems refer to the mechanical and electrical components of a methane mitigation system. In fact, the definition of an Active System is available in Methane Code (Ordinance No. 175790). This is a publication by the Los Angeles Department of Building and Safety (LADBS). Moreover, further descriptions of an…
Direct Shear Test
Direct Shear Test A Direct Shear Test is a geotechnical engineering laboratory procedure that measures the shear strength value of a soil sample.
Environmental Law
Environmental Law Environmental Law refers to the various categories of law that are put in place to protect the quality and condition of the earth and the environment. This sect of law aims to protect the well being of people and to preserve the earth’s natural resources, reserves, and wildlife. In fact, environmental laws apply…
Topple
Topple Definition Topple – Slope movement due to forces that cause an overturning moment about a pivot point below the center of gravity of the unit.
Maximum Soil Screening Levels (MSLs)
Maximum Soil Screening Levels (MSLs) Maximum Soil Screening Levels (MSLs): MSLs are a list of risk-based hydrocarbon concentrations for soil pollution evaluations, that is developed by the California Regional Water Quality Control Board. These screening levels are based on the Leaking Underground Fuel Tanks (LUFT) Manual, for cleaning up soil contamination from leaking USTs. However, MSLs…